Cruza XR500 User Manual

XR500 Electric Scooter User Manual Revised 01/12/12 PLEASE BE SAFE WHEN RIDING ALWA

Tire wear will differ based on rider weight, riding conditions and care. Replacement tires can be obtained at your local Cruza dea

3. After tightening the ‘Adjustable Race’, you will

CARING FOR THE BATTERIES The XR500 Scooter uses three 12V 12ah sealed lead-acid batteries that are connected in series. To prolong the life of the ba

Troubleshooting Guide * The diagram below should be used as a reference only. Any repairs attempted are done at the user’s own risk.

The XR500 does not conform to South African Motor Vehicle Standards and is not intended for operation on public streets, roads or highways. Serious

Quick Start Page 3 – General scooter do’s and don’ts 4 – Getting to know your XR500 5 – Package Contents & Assembly

GETTING TO KNOW YOUR CRUZA XR500 4

PACKAGE CONTENTS Your Cruza XR500 comes with the following items in the box. Please locate all of the following: 1. The Cruza XR500 Scoote

Front Wheeel Assembly Using a 17 or shifting spanner, remove the nut from one side of the axle. Remove the axle and both spacers. The shorter

Seat and Seat Post Installation 1. Place the seat onto the seat post and tighten the nut on the underside of the seat.

Riding 1. Make sure that all of the exposed bolts and screws are tightened. 2. Raise the kickstand to its upright position. 3.

Fig. 12 Fig. 13 To adjust the rear brakes: 1. With one hand, depress the brake caliper using your thumb and forefinger (Fig.12).